Home » Cooling » Server Room Humidity: Learn Critical Humidity Control

Server Room Humidity: Learn Critical Humidity Control

Server Room Humidity: Learn Critical Humidity Control

If your business has a data center or server room, you understand that it’s critical to maintain an optimal temperature and humidity level to ensure your equipment runs efficiently and safely. Several internal and external factors can influence your server room’s environment.

But maintaining the recommended humidity level can prove difficult if you don’t have the proper systems in place.

We’ll walk you through the ideal temperatures and tools you’ll need to control your server room humidity. We’ll also recommend some tips for keeping your server room in an optimal environment to maximize performance.

Mainframes Close Up

What is an Acceptable Humidity Level in a Server Room

An optimal humidity level for a server room is between 40-55%. Keeping the humidity at this level is critical because if the humidity rises, it can cause condensation in the server room, and water and electronics don’t mix.

If moisture builds inside your server room, it can corrode the hardware and cause component failure. Setting an alert for when the humidity reaches 70% can prevent condensation from building in your server room.

Is Low Humidity Bad for Servers?

Yes. On the flip side, if the humidity level gets too low, the electronic equipment can be susceptible to electrostatic discharge (ESD). ESD can damage sensitive components. To avoid low humidity, you’ll want to set alerts for when the humidity gets to 30%.

Related Link: Cooling Capacity: Everything You Need to Know

What is an Ideal Temperature in a Server Room

Server rooms need to have a fairly consistent temperature of 65-75 degrees Fahrenheit. To ensure your server room stays within this range, you’ll need to install a separate HVAC to control the temperature.

Another reason to keep your server room at this temperature range is that it creates a buffer if the HVAC fails. Your IT team should have enough time to restore systems and the equipment before it gets too hot and humidity causes condensation.

Tools Needed to Monitor and Control Your Temperature and Humidity

To maintain ideal temperatures and keep humidity levels low, you’ll need to invest in:

  • HVAC System: The air conditioning system needs to be dedicated to maintaining the server room temperature.
  • Environmental Sensors
  • Dehumidifiers: Dehumidifiers can monitor and maintain humidity levels based on your server room’s specifications.
  • Dry Bulb Thermometer: This can be an analog or digital thermometer that measures the ambient air temperature.
  • Wet Bulb Thermometer: This thermometer has a wet muslin sleeve that measures the air moisture content by monitoring evaporation rates.
  • Dew Point Temperature: This is the temperature specific to your server room where the air becomes too saturated, and water vapor begins to condense. Your specific dew point temperature will depend on the demands and size of your server room, air intake, and outside humidity.

Need a better humidity management system for your server room? Contact us to learn more about Altarum’s data center design solutions.

Related Link: How to Calculate Data Center Cooling Needs

Types of Data Center Dehumidifiers

Two types of dehumidifiers that are commonly used in data centers and server rooms to maintain optimal humidity levels:

  • Desiccant Dehumidifier: The desiccant dehumidifier doesn’t use a coolant to dehumidify the air. Instead, it uses an adsorbent like silica gel to absorb moisture from the air.
  • Condensation Dehumidifier: A condensation dehumidifier pulls air through an inlet to use a compressor to remove the moisture from the air.

Most server rooms use a condensation dehumidifier because of several advantages:

  • Can quickly pull hot, humid air through the system
  • Can cool below the optimum dew point level
  • Cheaper
  • Easy to operate
  • Can handle higher temperatures and humidity levels
  • Have higher capacity levels
  • Can drain large volumes of moisture
  • Doesn’t emit foul odors

What Causes Humidity in a Server Room Environment

There are three leading causes of humidity in a server room:

  1. Condensation: Server rooms can generate a fair amount of heat from the processing power. Condensation can occur when the hot air is drawn through the HVAC cooling coil and increase humidity levels.
  2. Infiltration: Humidity can seep in through cracks and porous floors, walls, and ceilings, which makes it difficult for the server room to regulate the humidity levels.
  3. Ventilation: Server and data centers need to ventilate the rooms with outdoor air, which can increase humidity levels. That’s why housing a server room in cold, dry, or desert environments can reduce the humidity fluctuations caused by ventilation.
Data Center Power Plugs

Our Best Tips on How to Manage Humidity Levels in a Server Room

There are several things your IT department can do to monitor and maintain the optimal humidity level within the server room:

  • Design the space for optimal performance and then install equipment that fits the requirements of your system.
  • Set up monitoring tools in the areas that experience the most extreme conditions.
  • Set up monitoring sensors at the rack level to see if the HVAC and dehumidifier are maintaining temperatures where it matters most.
  • Ensure that your measurement equipment is consistently and accurately measuring the room’s conditions.
  • Choose tools and equipment that are easy to maintain and can run for a long time.
  • Decrease the supply of fresh air by reducing ventilation and pressurization.
  • Identify equipment air-flow temperatures to offset the hot air flow using an HVAC system.
  • Increase the set points of the return air but ensure the air supply stays within the recommended temperature limits.
  • Monitor the dew points and dry bulb temperatures to assess whether the system needs to increase or decrease humidification.
  • Set minimum and maximum temperature alarms to alert you before the humidity becomes a hazard.

Install and Monitor Humidity Control Tools To Guarantee Equipment Efficiency

By installing and continually monitoring your humidity control equipment, your data center should run efficiently, and it will extend the life of your IT equipment. By managing the humidity levels at an optimal temperature, your equipment will be safe from corrosion and ESD.

Alterum specializes in data center design, power, cooling, and infrastructure. We can help you build an efficient and scalable server room for optimal performance and safety. We customize cooling systems solutions to meet your space, demands, and budget.

Need expert advice on how to improve your data center? Book a call with Alterum for a free onsite evaluation.

Related Link: Two Methods of Estimating Data Center Energy Consumption

Leave a Comment

Your email address will not be published. Required fields are marked *

13 − one =

Scroll to Top